Changelog
A complete history of all ORT-JTAG software updates, new features, improvements, and bug fixes.
ORT-JTAG V3.2.0
- AddedSupport for Qualcomm SM8650 (Snapdragon 8 Gen 3) JTAG interface
- AddedMediaTek Dimensity 9300 boundary scan pinout database
- AddedAutomatic JTAG chain detection for multi-core SoCs
- ChangedImproved NAND flash read speed by 40% for large partitions
- FixedFixed timeout issue on Samsung Exynos 2400 dead boot recovery
- FixedResolved USB connection stability on Windows 11 24H2
ORT-JTAG V3.1.0
- AddedSamsung Galaxy S24 series full JTAG support
- AddedXiaomi 14 / Redmi Note 13 Pro JTAG pinout database
- AddedExport NAND dump to multiple formats: BIN, HEX, SREC
- ChangedRedesigned device selection UI with search and filtering
- ChangedUpdated firmware communication protocol for faster handshake
- FixedFixed partition table parsing for GPT devices over 128GB
ORT-JTAG V3.0.0
Major Release- AddedComplete rewrite of JTAG boundary scan engine for 2x throughput
- AddedNew ISP (In-System Programming) mode for chip-level access without JTAG
- AddedDead boot repair wizard with step-by-step guided recovery
- AddedSupport for eMMC 5.1 and UFS 4.0 storage interfaces via JTAG
- AddedMulti-language interface: English, Chinese, Arabic, Turkish, Spanish
- ChangedModernized UI framework with dark mode support
- ChangedRestructured device database with 500+ new pinout entries
- FixedMemory leak in continuous read operations over 32GB
ORT-JTAG V2.8.0
- AddedQualcomm SDM680 / SM6375 JTAG pinout support
- AddedOPPO / Realme device database expansion (40+ models)
- AddedBatch processing mode for multiple device operations
- ChangedOptimized boundary scan clock frequency auto-detection
- FixedFixed CRC validation error on partial NAND reads
ORT-JTAG V2.7.0
- AddedSamsung Exynos 1380 dead boot recovery support
- AddedHuawei Kirin 710A JTAG boundary scan profiles
- AddedLog export and diagnostic report generation
- ChangedImproved error messaging with troubleshooting suggestions
- FixedFixed voltage regulator calibration for 1.8V JTAG interfaces
- FixedResolved firmware update failure on certain USB 3.0 controllers
ORT-JTAG V2.6.0
- AddedMediaTek Helio G99 / G96 JTAG support
- AddedVivo and iQOO device pinout database (25+ models)
- AddedPartition backup scheduler for automated forensic workflows
- ChangedReduced software startup time by 60%
- FixedFixed device detection issue on Windows 10 with certain USB hubs
ORT-JTAG V2.5.0
- AddedQualcomm SM8450 (Snapdragon 8 Gen 1) full JTAG support
- AddedSamsung Galaxy A series (A13, A23, A33, A53) pinouts
- ChangedRewrote NAND bad block management algorithm
- ChangedUpdated USB driver for improved macOS Ventura compatibility
- FixedFixed write verification mismatch on certain Toshiba NAND chips
ORT-JTAG V2.4.0
- AddedISP pinout auto-detection for common Samsung and Xiaomi boards
- AddedFull dump comparison tool with diff highlighting
- AddedEMMC partition editor with raw hex view
- ChangedImproved dead boot repair success rate for Qualcomm devices
- FixedFixed occasional crash during long NAND write operations
ORT-JTAG V2.3.0
- AddedQualcomm SM7325 (Snapdragon 778G) JTAG support
- AddedMediaTek Dimensity 700 / 800U boundary scan profiles
- AddedAutomatic firmware update checker
- ChangedRedesigned connection wizard with hardware status indicators
- FixedFixed JTAG chain initialization failure on multi-TAP devices
ORT-JTAG V2.2.0
- AddedSamsung Exynos 990 / 1080 dead boot support
- AddedNokia and Motorola device database expansion
- ChangedOptimized memory usage for large partition operations
- FixedFixed sporadic USB disconnect during boundary scan
ORT-JTAG V2.1.0
- AddedQualcomm SM8250 (Snapdragon 865) full JTAG chain support
- AddedIntegrated voltage level shifter control (1.2V / 1.8V / 3.3V)
- AddedNAND block-level erase and program verification
- ChangedUpdated driver installer for Windows 10 20H2 compatibility
- FixedFixed regression in Huawei device JTAG connection
ORT-JTAG V2.0.0
Major Release- AddedNew boundary scan engine with support for ARM CoreSight debug
- AddedDead boot repair for 200+ device models
- AddedFull NAND flash read/write/erase with bad block management
- AddedData extraction mode for forensic analysis
- AddedCustomizable voltage output: 1.2V, 1.8V, 2.5V, 3.3V
- ChangedComplete UI redesign with modern interface
- ChangedRestructured device database format for faster lookups
ORT-JTAG V1.5.0
- AddedQualcomm MSM8953 / MSM8937 JTAG support
- AddedMediaTek MT6762 / MT6765 boundary scan profiles
- ChangedImproved JTAG clock stability for noisy connections
- FixedFixed file save dialog not remembering last used directory
ORT-JTAG V1.4.0
- AddedSamsung Exynos 9610 / 7885 JTAG pinouts
- AddedSpreadtrum SC9863A boundary scan support
- AddedConnection test and diagnostic mode
- FixedFixed incorrect partition offset calculation for some LG devices
ORT-JTAG V1.3.0
- AddedQualcomm SDM845 (Snapdragon 845) JTAG support
- AddedHuawei Kirin 970 / 980 boundary scan
- ChangedUpgraded USB communication stack for reliability
- FixedFixed boot partition read on Samsung eMMC 5.0 devices
ORT-JTAG V1.2.0
- AddedISP mode for in-circuit NAND access
- AddedXiaomi and OPPO device pinout library
- ChangedImproved NAND flash identification algorithm
- FixedFixed memory overflow on dump files larger than 4GB
ORT-JTAG V1.1.0
- AddedMediaTek MT6757 / MT6750 JTAG support
- AddedPartition-level read/write with progress indicator
- AddedDevice identification and CID/CSD display
- ChangedUpdated user interface with tabbed navigation
- FixedFixed JTAG connection dropout on long operations
ORT-JTAG V1.0.0
Initial Release- AddedJTAG boundary scan engine for ARM-based SoCs
- AddedSupport for Qualcomm MSM8916 / MSM8939 / MSM8994
- AddedNAND flash full dump read/write
- AddedDead boot detection and basic repair
- AddedIntegrated voltage control (1.8V / 3.3V)
- AddedUSB 2.0 Hi-Speed connectivity
Added New featuresChanged ImprovementsFixed Bug fixes